+- The DeLorean Owners Club UK Forum (http://www.deloreans.co.uk/forum)
+-- Forum: DELOREAN HELP AND ADVICE & PARTS CROSS REFERENCE (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=4)
+--- Forum: 4 - Transmission - Manual & Automatic (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=16)
+--- Thread: Clutch Slave Cylinder (/showthread.php?tid=3329)
Clutch Slave Cylinder - dogs_bolx - 16 Feb 2012
Hi guys, does any have or know a place where I can get hold of a Slave Clutch Cylinder as reasonable cost? Is it possible to repair seals on an old one?
Many thanks in advance.
Re: Clutch Slave Cylinder - Chris Williams - 16 Feb 2012
Dave Howarth (contact details in mag) or I'm told DMCH reproductions are good value, either through Ed in Holland or Houston direct.
Chris
Re: Clutch Slave Cylinder - Rich H - 17 Feb 2012
German and Swedish (GSF)
GSF ref. R71690 Part no. 717RE0010
1992 Renault Espace V6
Re: Clutch Slave Cylinder - dogs_bolx - 25 Feb 2012
Thanks guys, it appears the cheapest place to buy these at the moment is delorean.eu
1 x SLAVE CYLINDER (100843) = 77,11EUR
Delivery Approx =15EUR
Thanks for your help!
Re: Clutch Slave Cylinder - dogs_bolx - 26 Mar 2012
Hi Guys, I got the Clutch Slave cylinder and saw a guide to fitting on the net a while back. I think it was a tech note from delorean.com, but its not there any more, I can't find anything about it.
Would anyone happen to have it or tell me the procedure for changing it in the easiest way possible?
Many thanks, Martin
Re: Clutch Slave Cylinder - dogs_bolx - 03 Apr 2012
Does anyone have a method for removal/installation?
Thanks!
Re: Clutch Slave Cylinder - Guinney1971 - 03 Apr 2012
I'm sure that either RichH or Martin will be able to answer this very soon for you (or
anyone else who's done it)
Re: Clutch Slave Cylinder - Chris Williams - 09 Jul 2012
Having had to get one myself I can confirm this fits: http://www.ebay.co.uk/itm/310393893618? ... 1423.l2649
Delphi part No: LL21520
TRW PJN 117
Bendix ????13211
I think most people attack these from underneath the car, I however removed all the fuel metering head assembly (including air inlet) this allowed access from above. Fairly straightforward remove clutch hydraulic line, remove two 11mm headed bolts, and slide up (may need to push clutch arm a bit to relieve pressure) I have seen pictures where the pin is removed from the clutch fork before lifting the slave up leaving the 'rod' left in the slave, but the above way worked for me (pictures in an upcoming mag!) bleed system, job done!
A bit difficult to see in the picture but it's down below the 3 coolant pipes!
Chris
Re: Clutch Slave Cylinder - stunned_monkey - 09 Jul 2012
Suggest for stuff like this call Martyn Reed (Martyn on here) he works for Euro Car Parts and even after only a year of ownership i think his cross reference list is longer and more up to date even than mine!
Re: Clutch Slave Cylinder - Guinney1971 - 10 Jul 2012
ooh, good to know Martin (and Martyn), next time I need summat I'll know who to contact
Re: Clutch Slave Cylinder - Chris Williams - 14 Jul 2015
Seen over on DeLorean.ie New Delphi slave cylinder at only £19.98 http://www.bestpartstore.co.uk/1761599 plus shipping
Chris
Re: Clutch Slave Cylinder - Guinney1971 - 23 Jul 2015
thats a good price!