Posts: 168
Threads: 45
Joined: Apr 2011
I know ed does most but wondered if there are any bits i can get over here in the UK?
Rear Discs & Pads
Rear Wheel Bearing
Rear CV Joints Inner/Outer
any help be great
thanks
Dan
Posts: 168
Threads: 45
Joined: Apr 2011
oh so after a bit of flying round the net and forum i seem to have found a few cross references, just the brake discs for the rear i am struggling with?
Posts: 1,119
Threads: 96
Joined: Oct 2006
viewtopic.php?f=26&t=862
Dont know if this will help but I can't find an actual cross reference for these.
I'm sure with these measurements you will source something more local....
It might also be worth talking to Martin (Stunned Monkey) as he does upgraded braking systems I believe.
Posts: 112
Threads: 18
Joined: Oct 2010
Dan, what x-ref did you find for the cv joints?
I think the lips are unobtainable, and mine are mashed. Will be fun sorting them out. So I would be I interested in this.
Cheers,
a
Posts: 1,119
Threads: 96
Joined: Oct 2006
Andy, is it the cv boots you mean or the actual joints?
If it's the boots, when cross referenced to the Motoquip part number these are what comes up... Looks right to me
http://www.ebay.co.uk/itm/Quinton-Hazel ... 337c7c8231
Ben
Posts: 112
Threads: 18
Joined: Oct 2010
Hi Ben,
Thanks, I already have the boots, but thought you guys were talking about the joints. Not rebuilt mine yet, but its o. The cards. A PO or whoever has let the driveshafts hang off the joints. :evil: :evil:
Andy
Posts: 2,560
Threads: 36
Joined: Jul 2006
Dave Howarth has discs. But phone him.
Chris Parnham
Ex RHD Auto's etc.etc
Main Car.. Kia E Niro 4+
Skoda Yetil 4X4.
1970 Jago Jeep.
DOC Club Historian
Posts: 168
Threads: 45
Joined: Apr 2011
yeah complete cv joints im after, i will check what i found at work i dont have it to hand!
got to ring dave anyway so will get that sorted
Posts: 112
Threads: 18
Joined: Oct 2010
Thanks Dan, let me know what you turn up.
Cheers,
A
Posts: 4,525
Threads: 812
Joined: Jul 2006
Rear discs:
viewtopic.php?f=26&t=862
The part number on the last posting is still valid and these can be ordered through any Unipart branch, just tell them to get them from Brake engineering.
Chris
Posts: 168
Threads: 45
Joined: Apr 2011
spoke with dave and he says cv joints can be refurbed so sending them off to him to be done.
Dave really is a delorean wizard!