Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HOT WARM START ISSUE - NOT ACC
#1
car starts perfect when cold, as soon as its warm you have to turn it over around 3 to 6 times and finally fires up, did the cold start wire swap and it starts so I purchased the fuel accumulator at great expense and fitted that and its still the same! also changed the fuel tank piping, runs perfect when it starts, please help before I lose my rag and put it up for sale!
Reply
#2
Have you tried this? http://www.specialtauto.com/delorean-pa ... g-plun.jpg

http://www.specialtauto.com/delorean-pa ... ction.html
Worked on my old car and seems to be the other hot start issue problem solver!
Is it the correct part and how old is the accumulator you fitted?
Chris
Membership Secretary DOC UK
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584
Reply
#3
thanks chris, pulled it out this morning and the o-ring was in 3 pieces so was thinking I had solved it, new o-ring, put it together warmed up, problem still there! got the accumulator new from dmc Europe, someone has bridged the cold start and theres a button in the console! so its been a long ongoing issue, getting embarrassing now when you have a crowd round it.....
Reply
#4
wilddelorean Wrote:thanks chris, pulled it out this morning and the o-ring was in 3 pieces so was thinking I had solved it, new o-ring, put it together warmed up, problem still there! got the accumulator new from dmc Europe, someone has bridged the cold start and theres a button in the console! so its been a long ongoing issue, getting embarrassing now when you have a crowd round it.....


I had a starting problem with mine years ago, again when a crowd was round it embarrassingly,
it was poor crimps on the ballast resistor connections. We cleaned them up, and re-crimped the
connectors, and all was ok.
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply
#5
All a bit odd really :? I would make sure your using the correct 'O' ring in the metering head as I think they need to be spot on to cure the hot start issues. The only other thing with most car issues is to work backwards and remove all the stuff thats been put on that should not be there. Whats the button doing then? keeping the cold start valve open to chuck more fuel in?
IIRC is there not a check valve in the fuel pump that can fail as well?
Chris
Membership Secretary DOC UK
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)