Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How best to fit Front Facia
#1
I fitted a new front facia to my previous car and am just about to get to the stage of fitting a new one to my new project. Question is whats the best way to fit these especially with regarde to the 'plate' (long strip with bolts fitted to) that runs along the top underside edge? Whilst I fitted the last one all OK I was not happy with how to fit this properly, with lights in/out Etc Etc. Anyone have any good tips for re-fitting this.
Thanks

Chris.
Ps I will put this on DMC talk as well
Membership Secretary DOC UK
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584
Reply
#2
Wedge it in as far as it'll go to start with, then relax it if needs be. It's not a quick process but it's usually better tight than loose. Oo-er.
Martin Gutkowski
DeLorean Cars
http://www.delorean.co.uk
Reply
#3
Oh-er missis, ta
Membership Secretary DOC UK
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)