Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Angle Drives
#61
I've emailed today asking for an update.
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply
#62
Who is the contact at Speedograph for the angle drives Claire? I am working to get a one piece cable made up, so if they need multiple prod's for the angle drives I'm happy to give them a nudge.
VIN# 04708, Grey interior, 5 speed, October 1981
DOC 649
ex DOC 562
Reply
#63
I deal with the manager, he said to me that the guy who makes them is still off ill, and he's waiting
to hear back from a specialist about when he will be well enough to return to work.

He said he'd tried to make one himself, but hadnt been sucessful, and he said he'd be back to me
as soon as he'd spoken to the guy who normally makes them.

I would say watch this space....... :roll:
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply
#64
I still find it ridiculous that they only have one person there has the knowledge to put them together. Shock
VIN# 04708, Grey interior, 5 speed, October 1981
DOC 649
ex DOC 562
Reply
#65
There isn’t anything particularly special about these gearboxes except the gears themselves which almost certainly come from a supplier such as HPC (although if they do, I’d suggest going elsewhere!). With the cables sourced from a transmission cable supplier (pence each I would imagine), the other parts should be knock-uppable by any half decent engineering firm. Of course to speedograph these bits are all off-the-shelf so the price may well end up higher. Possibly worth investigating?
Martin Gutkowski
DeLorean Cars
http://www.delorean.co.uk
Reply
#66
In fairness to them, they are only a small firm now and I suspect they are feeling the pinch a bit. Probably difficult to justify another member of staff?
Chris Parnham

Ex RHD Auto's etc.etc

Main Car.. Kia E Niro 4+
Toyota Vitz 4X4 1999 (the smallest 4X4 by far!)
Toyota RAV4 EV 1999.
1970 Jago Jeep.

DOC Club Historian 
Reply
#67
You're right Chris P, they are only a small 'old school' engineering firm, but they are
always busy when I speak to them or go over there.

I'll contact Tim again next week to see if he's had a chance to speak to his man and
find out what the latest is.
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply
#68
Update:

Had the following email from Tim at Speedograph today after yet another email to them
asking what was happening as I need to order 10 Angle Drives:

Attn Claire.

After various discussions about this box and its fitment we have decided to discontinue making this item.
I am sorry about this.

Regards
Tim


So, does anyone on here know an engineering firm who'd be willing to copy the design and make these for us?
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply
#69
What a load of *rap, they keep us waiting 6+ months and then say that. Myself and the other people waiting could have got and fitted one from elsewhere in this time :roll: :roll: We don't even have a sample we can use do we, for another company?. Thanks for trying Claire you did the best you can.
Chris
Membership Secretary DOC UK
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584
Reply
#70
Not sure if it helps, but I still have the original one from my car. It doesn't work mind, but it's available if it's of any use to use as a pattern.
VIN# 04708, Grey interior, 5 speed, October 1981
DOC 649
ex DOC 562
Reply
#71
I'll try and speak to Rich H over the weekend if he's about, a friend of his has an engineering
business, theres a slim chance he may be able to help.

I want to order 10 of these, you'd think they'd be happy to take an order for over a grand in
this day and age.

Oh well :roll:
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply
#72
Similarly, also not sure if it helps, I have one available.

Removed from my car, as it wont be on the road any time soon, and we could use this as a pattern.

Bad news: its in Glasgow, currently 450 miles away.

Good news: I'm going up at the end of the month, and am happy to post it on.

Would need a reference to confirm that mine is actially a factory item, and not a DMCH repro part. But it does work, so may well be factory....!

Is there an easy way to differentiate between facotry and repro?

a
Reply
#73
As the one who had these drives made by speedograph originally, the reason I stopped selling them was their unpredictable customer service.

As to getting them made elsewhere, the easiest approach would be to get one copied. The gears need to either be off-the-shelf or prototyped and this gets expensive. I can help with this sort of stuff as it's part of my day job. However I would suggest that there really isn't much point: The drives available from the US aren't expensive and are apparently now more reliable.
Martin Gutkowski
DeLorean Cars
http://www.delorean.co.uk
Reply
#74
I may have someone who can help but he would need one to examine/copy.

Does anyone have one, faulty of otherwise which I could show him? I would obviously return it.

It may not be his thing but I could certainly waft it past his nose.

James
www.classicdelorean.com
Colchester - Essex - UK
Reply
#75
appreciate that James, Phill is taking one we have here (old one off my car) to a firm in
Derby hopefully one day this week.

Failing that, if getting them made here works out more expensive then buying from DMCH,
then I might speak to James Espey about a bulk order if their ones are allegedly reliable now.
Claire Wright  - Club Treasurer
Jul 1981 DeLorean - Flopsy #2292 
Aug 1989 Cavalier 1.6L - Guinney
Apr 2021 Mokka-e Launch Edition - Evie
#170
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)