15 Apr 2009, 17:23
Hi
I have an 82 exhaust (with tips) and a cat by pass pipe if anyone is interested?
Al
I have an 82 exhaust (with tips) and a cat by pass pipe if anyone is interested?
Al
82 exhaust and cat bypass pipe for sale
|
15 Apr 2009, 17:23
Hi
I have an 82 exhaust (with tips) and a cat by pass pipe if anyone is interested? Al
15 Apr 2009, 17:31
Does this mean your new system is on then Al? Did it fit ok? No problems with it hitting the frame?
VIN: 6511
15 Apr 2009, 17:36
It isnt quite on yet!, but the old one is off!
Does yours hit the frame?, I know they seem to be mighty close. Al
15 Apr 2009, 18:00
Mine has got about 3/4mm of clearance on the driver's side. Over the weekend it's picked up a bit of a mark where it's touched - but it's only does it when you start her up, the rest of the time the torque spins it away from the frame rather than towards, which is fortunate. Just about OK I reckon!
VIN 7176
DOC 643
15 Apr 2009, 19:55
Hi Mike
It might have gone, but feel free to PM me an offer. Sensible one that is! Al
16 Apr 2009, 09:28
I have an 81 exhaust with the CAT bypass pipe, I guess they'll be a few of these for sale now, what with so many people buying the SS exhaust.
p.s. my exhaust misses the frame by at least 3cm on both sides
www.classicdelorean.com
Colchester - Essex - UK
16 Apr 2009, 10:28
JamesRGUK Wrote:I have an 81 exhaust with the CAT bypass pipe, I guess they'll be a few of these for sale now, what with so many people buying the SS exhaust. Was just going to post mine is the same ... seems odd some are nearer than others...
16 Apr 2009, 10:48
bozzzydmc Wrote:JamesRGUK Wrote:I have an 81 exhaust with the CAT bypass pipe, I guess they'll be a few of these for sale now, what with so many people buying the SS exhaust. Wonky engine mounts maybe?? NickT
16 Apr 2009, 10:51
Mine has brand new mounts and its still quite close. Not as close as Gez's though!
VIN: 6511
18 Apr 2009, 08:26
Maybe the cars are consistent and it is the exhaust parts that aren't consistent in their dimensions? :?
Regards,
Chris Hawes DOC 138 Ex owner of VIN 5255 Grey, 5-speed
18 Apr 2009, 09:52
That's what Chris N and I think - you can see the angle the pipe is welded at being different on each side of the back box on mine - that's why one comes so close to the frame. It only touches on startup though, the rest of the time it's clear (just about!).
VIN 7176
DOC 643
19 Apr 2009, 09:42
If it rubs/hits on every turn of the key surely it'll wear through the epoxy over time through to the metal?
Regards,
Chris Hawes DOC 138 Ex owner of VIN 5255 Grey, 5-speed
19 Apr 2009, 11:51
Send them all back if they aren't consistent.
NickT |
« Next Oldest | Next Newest »
|