Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
re help. my seats runners are rusted
#1
hi all

my first post and a puzzle!.

myi have taken out my seats but the runners are very rusty. beyond help.

the adjuster bar has broken on one and this is not available from dmc in the US.

does anyone know of an equivalent, or anywhere that they can be restored?.
i think too rusty to weld, has broken under the seat.

i have a spair set of grey seats that i am installing.

thanx for any help

regards

Steve
vin 1621
doc 370
Reply
#2
Hi steve, theres a few people who may have them runners, Dave Howarth, Chris Nickolson, Dan Shane to name but a few, just phone about im sure you will sort something out cheers Tony TT
Reply
#3
Hi

thanx for the advice. i have found out now that the adjust bars are the same on an esprit.

the runners themselves are available from dmc in the US.

thanx again

Regards

Steve
Steve Saunders
Wolverhampton
ex owner vin 1621
doc 370
Reply
#4
Just a thought - if you do replace them, hang on to the old ones - they can be shot-blasted to remove rust for very little cost - tenner or thereabouts - then once clean, they could be welded quite easily. A fresh new coat of black paint and you're on your way...
Richard Hanlon
Derbyshire
DOC 393

1981 DMC-12 VIN 06126
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)