Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Carb set on ebay
#1
This may (or not) be of interest...... me thinks it will go for a lot of money though.....
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :middle:uk

if the link does not work item no is; 150130418920

Chris
Membership Secretary DOC UK
2021's DeLorean event: http://www.deloreans.co.uk/forum/showthr...p?tid=6056
VIN#15768 Ex VIN#4584
Reply
#2
yeah, I saw that.

wasn't sure whether it'd work on our enigne....

it'd give more high (i guess) to the engine. pluss how would all thr computer's work?


45 BHP extra...hmm. Smile
-------------------------
- Dave Smith

VIN: #00944 DOC: #535
VIN: #03193
Reply
#3
It would work OK in conjunction with a matching distributor.

You wouldn't need the computers, just the ignition amplifier.

I think you'd have to drill a big hole in the engine cover though.

A nice rolling road session and a carb re-jet will make it work nice.

NickT.
Reply
#4
Eh up bling boy ! Smile

Now a hot rod style D!.. you not up for that? Wink

.....now what was i doing a week ago :roll:
Reply
#5
Gettin' fried on Magner's thats what!!
[Image: DeloreanSig.jpg]
Reply
#6
how can we forget it Big Grin
DOC398
VIN#3484
Tourettes Tutor
I have the X factor
Reply
#7
wheres a time machine when you need one Smile
Reply
#8
Damn and blast! I've been looking for something like this for a while now, and when a set finally show up they're for the oddfire engine.......

Oh well, at least it means that any of you bidding eon't have any competition from me.
Life begins at 90 degrees....
Reply
#9
I don't think it would matter if it was for an even or oddfire engine.
The carb mixes fuel with air due to airflow, not sequentially to the timing of the engine.

The KE-Jetronic fuel injection fuel depending on airflow and is independant of odd/ even fire engine.

The carb uses an independant barrel per cylinder anyway !

NickT.
Reply
#10
I wish it were that simple, but the oddfire engines have differently shaped intake ports to the evenfire engines. Consequently the intake manifolds are not interchangeable.
Life begins at 90 degrees....
Reply
#11
That might be a little technical issue then !

Does your car have a later engine in or something?

NickT.
Reply
#12
Yes, but it's a Volvo not a DL!
Life begins at 90 degrees....
Reply
#13
Oh I see.

Your engine should have more HP with the higher compression pistons and a better balanced engine.

Maybe a nice free flow exhaust system woudld be a good next move.

Love to see your car.

NickT.
Reply
#14
I've got a '88 760GLE with the B280E with 196k miles on it that I've converted to manual (Volvo never made evenfire manuals, so it wasn't a straightforward job!). It has a freeflow exhaust on it already, but with the original manifolds so the next job is to get a set custom made.

Future plans are either triple carbs, ITB's and aftermarket EMS, turbo or supercharger - I've yet to decide which.

It will be on show at the Volvo Owners Club show next Sun (17th) near York and will also be at the Uxbridge Car Show on July 15th and the Volvo Marque Day at Gaydon on Sept 2nd. Alternatively it can be found roaming the streets in Derbyshire........!

There's a thread about it here;

http://www.volvoforums.org.uk/showthread.php?t=20244
Life begins at 90 degrees....
Reply
#15
and there you are. ended.

who got em for £560? any of you guys? Big Grin
-------------------------
- Dave Smith

VIN: #00944 DOC: #535
VIN: #03193
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)