re help. my seats runners are rusted

[steve.s]

hi all

my first post and a puzzle!.

myi have taken out my seats but the runners are very rusty. beyond help.

the adjuster bar has broken on one and this is not available from dmc in the US.

does anyone know of an equivalent, or anywhere that they can be restored?.
i think too rusty to weld, has broken under the seat.

i have a spair set of grey seats that i am installing.

thanx for any help

regards

Steve
vin 1621
doc 370

[Tourettes Tony]

Hi steve, theres a few people who may have them runners, Dave Howarth, Chris Nickolson, Dan Shane to name but a few, just phone about im sure you will sort something out cheers Tony TT

[steve.s]

Hi

thanx for the advice. i have found out now that the adjust bars are the same on an esprit.

the runners themselves are available from dmc in the US.

thanx again

Regards

Steve

[Rich Hanlon]

Just a thought - if you do replace them, hang on to the old ones - they can be shot-blasted to remove rust for very little cost - tenner or thereabouts - then once clean, they could be welded quite easily. A fresh new coat of black paint and you're on your way...