Front shock lower bushing.

[Barson]

Hello

So I was underneath the front of my car last week and noticed that the bushing that sit between the bottom of the shock and the pin that holds it to the lower control arm were disintegrating (both sides). bummer.


it's number 36 on this diagram:





code: 109080

If I remove the wheel and undo the bolt/pin that holds the shock to the lower control arm these things will just pop right out, right?

I'm just thinking - are the shocks fully extended when there's no weight pressing on them?

ta!
Barzo.

[Daniel Shane]

Correct,

When the car is jacked up you can undo them as the damper is not under load on the front

Dan