No power to starter

[cummil2]

Just looking for a pointer, Same me changing everything , I have no power to the starter , Could anybody point me to a relay or fuse "Please"

[Future]

On early vehicles (prior to #2548) the starter solenoid's operating voltage, in certain conditions was not high enough to ensure a reliable operation. If your batterie is in a good condition. check the starter relay. There is a Service Bulletin (Technical) on that problem: ST-05-2/82.
I had the same problem and changed to a stronger batterie, no problems since.
It's the second relay from the top row, next to the red one.

---

Try starting with closed doors, you lose 1.2V with both doors open when you still have the original bulbs in the doors.
My battery had 45A/H and now has 90A/H, you need about 75A/H batterie for a V6 engine.

[cummil2]

(24 Jun 2017, 10:26)cummil2 Wrote: Just looking for a pointer, Same me changing everything , I have no power to the starter , Could anybody point me to a relay or fuse "Please"

Thank you.......Issue resolved