+- The DeLorean Owners Club UK Forum (http://www.deloreans.co.uk/forum)
+-- Forum: GENERAL DELOREAN DISCUSSION (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=2)
+--- Forum: General Discussions on the DOC / Car / Company / JZD (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Fuel pump cover (/showthread.php?tid=4699)
Fuel pump cover - wythet - 30 Sep 2014
Hi All!
I need to re-attach my fuel pump cover but not one screw/fastener is still in place so I'm not sure what I'm looking for. I cant find anything on the schematics online which indicate what type of fastener is used.
Any help appreciated.
Had to order a fuel sender today!
Also managed to fix the mirror switch (all the bearings and bars were still in bottom of the door or the switch housing so super lucky!). A couple of hours of patience and all good!
Thanks!
Thomas.
Re: Fuel pump cover - Rissy - 30 Sep 2014
If it's the fuel pump boot lid you mean:
http://www.delorean.eu/catalog/product_ ... 39rfd83ag2
Then it's held in place with one of these big clips:
http://www.delorean.eu/catalog/product_ ... 39rfd83ag2
Re: Fuel pump cover - wythet - 30 Sep 2014
Not quite, its the screws/fasteners for this:
http://www.delorean.eu/catalog/product_ ... _id=118002
I should have been more specific :o)
Re: Fuel pump cover - Rissy - 30 Sep 2014
Ah!
It's the DeLorean favourite fastner type. The good old rivnut sort. I think M5 size with pozi pan head screws and washers screwed through.