Project VIN 2456 and Sold VIN 2835 - Printable Version +- The DeLorean Owners Club UK Forum (http://www.deloreans.co.uk/forum) +-- Forum: GENERAL DELOREAN DISCUSSION (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=2) +--- Forum: Members Cars (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=40) +--- Thread: Project VIN 2456 and Sold VIN 2835 (/showthread.php?tid=2009) |
Project VIN 2456 and Sold VIN 2835 - mnickels - 14 Dec 2008 Here they are to add my contribution Starting with Project 2456 And here is now sold 2835 Re: Project VIN 2456 and For Sale VIN 2835 - A Van - 14 Dec 2008 Any interest in UEZ yet ? Re: Project VIN 2456 and now sold VIN 2835 - mnickels - 14 Dec 2008 2835 is now owned by Ed at Delorean Europe and once the dust settles on my life I will get stuck into 2456. Re: Project VIN 2456 and For Sale VIN 2835 - Glen & Sam - 21 Dec 2008 hows it getting to eds Re: Project VIN 2456 and Sold VIN 2835 - mnickels - 13 Apr 2009 Now my house is back together and I am back at home I have made a start on 2456. Today Thomas called round and we disconnected the rest from the chassis ready for lifting the body off. Once the blocks are delivered we will split the two and progress the restoration. Re: Project VIN 2456 and Sold VIN 2835 - Dan6457 - 13 Apr 2009 Hi Mathew, Do you think it will be back together and running in time for the DOI meet up in sept? Re: Project VIN 2456 and Sold VIN 2835 - mnickels - 13 Apr 2009 That is my target at the minute Dan Re: Project VIN 2456 and Sold VIN 2835 - Darren C - 13 Apr 2009 Hi Matt, Good to hear from you on the Furum again. You gotta tell me more about the garage in the photo's There's some interesting cars in there. 356, Xk150, E-types, MG, Early SL, and what looks like a Wolseley or early Rover. Kind regards D Re: Project VIN 2456 and Sold VIN 2835 - mnickels - 13 Apr 2009 Darren C Wrote:Hi Matt, I wish I knew more but apart from the cars they advertise and what is in the photos that is all I have. Here is their current inventory. I agree there is a lot of interesting cars http://www.gullwingmotorcars.com/inv.ph ... n=complete Re: Project VIN 2456 and Sold VIN 2835 - mnickels - 19 Apr 2009 Here are pictures from today. Re: Project VIN 2456 and Sold VIN 2835 - Dan6457 - 20 Apr 2009 Getting there! One thing though, your going to have to get the body high enough to clear the engine so you can roll the chassis out. If you'd put the car in front first you wouldn't have to get the body as high, just enough to clear the gear lever and roll it out backwards. Re: Project VIN 2456 and Sold VIN 2835 - mnickels - 20 Apr 2009 The plan is to take the engine out into the workshop area in the rear of the garage and mount it on a stand so shouldn't be too much of a problem I hope. |