WTB: Door Strut bracket backing plate - Printable Version +- The DeLorean Owners Club UK Forum (http://www.deloreans.co.uk/forum) +-- Forum: GENERAL DELOREAN DISCUSSION (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=2) +--- Forum: DeLorean Cars or Parts For Sale or Wanted (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=26) +--- Thread: WTB: Door Strut bracket backing plate (/showthread.php?tid=1578) |
WTB: Door Strut bracket backing plate - Barson - 22 May 2008 ahoy hoy. anyone got one of these: http://www.delorean.com/store/p-9415-backing-plate.aspx I can buy? has to be in decent condition, preferably new, obviously considering what it's for I'll ask Grady's or Ed if not. cheers! Dave. - Tourettes Tony - 23 May 2008 is it one of those things behind the nipple for the door strutt TT - Barson - 23 May 2008 it's this thing: that sits in the cavity here: - Tourettes Tony - 23 May 2008 i think i have one i will look tt - bozzzydmc - 23 May 2008 looking at your fibreglass , have you thought about these matey? http://www.delorean.eu/product_info.php ... cts_id=170 - Dan6457 - 23 May 2008 Stupid question, but how are those plates attached? How do get behind the fibre glass to put a nut on the end of the bolts? - Tourettes Tony - 24 May 2008 thats what i replaced mine with mike, and i also extended them to come in further TT - Barson - 24 May 2008 Mike yeah, i have those and started to work to instal them, but the existing bolts snapped in the backing plat as you can see in my first picture (you can see the corner of one of the new brackets in the second picture Dan There's a cavity behind the fibreglass that can be accessed above the headliner in the car. you have to dig out some rubber filler: poor picture, but you get the idea. I'm going to try and build the fibreglass up to that it's flat and I can mount the bracket properly. - Tourettes Tony - 24 May 2008 i think this is a common problem caused by people using the doors too much :lol: TT - JamesRGUK - 24 May 2008 Tourettes Tony Wrote:i think this is a common problem caused by people using the doors too much :lol: TT As daft as it sounds I think at one point one of the vendors was selling replacement door gas struts that where actually fractionally too long. This meant when you closed the door the strut couldn't compress any more and it flexed the ball mount. not sure if this is true, but it was a rumour that floated around for a while and was blamed for damaged to the strut mounting on many cars. Just my 2p. James - Guinney1971 - 24 May 2008 this is what broke on Sorbet a while back - Phill did a 'how to fix' in one of the previous DOC Mags IIRC. He got the bits off Dave Howarth. Hope this helps, - Tourettes Tony - 24 May 2008 iv heard of that as well, but cant remember who was supplying them TT - JamesRGUK - 25 May 2008 Tourettes Tony Wrote:iv heard of that as well, but cant remember who was supplying them TT I just replaced my struts with a new set from Ed Uding, they are the stuff of dreams. My doors now open effortlessly beckoning me inside James |