+- The DeLorean Owners Club UK Forum (http://www.deloreans.co.uk/forum)
+-- Forum: GENERAL DELOREAN DISCUSSION (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=2)
+--- Forum: Members Cars (http://www.deloreans.co.uk/forum/forumdisplay.php?fid=40)
+--- Thread: VIN#6126 Chassis restoration (/showthread.php?tid=6008)
RE: VIN#6126 Chassis restoration - er1c - 01 Jun 2020
Superb info thanks for that Chris and Rich. Loving the pic Chris I didn't clock it was you on the first pass.
VIN#6126 Chassis restoration - Rich Hanlon - 06 Jun 2020
Today's progress [emoji16][attachment=853][attachment=854][attachment=855][attachment=856]
Sent from my moto g(7) power using Tapatalk
RE: VIN#6126 Chassis restoration - Chris Williams - 06 Jun 2020
Exiting, nearly time to re-join them!
RE: VIN#6126 Chassis restoration - Chris P - 06 Jun 2020
Many congrats Richard...looking great....
RE: VIN#6126 Chassis restoration - er1c - 07 Jun 2020
Loving it as always Rich, Do you think you will have a bucket of left overs ?
VIN#6126 Chassis restoration - Rich Hanlon - 07 Jun 2020
Almost certainly!! There will definitely be the old rusty steel fasteners where I have replaced then with new stainless ones, and probably a fair bit more besides!
I'm finding the exploded diagrams on DeLorean.com really useful in getting things back together where I have to confirm an assembly that's not immediately obvious.
Sent from my moto g(7) power using Tapatalk
RE: VIN#6126 Chassis restoration - er1c - 07 Jun 2020
(07 Jun 2020, 09:24)Rich Hanlon Wrote: Almost certainly!! There will definitely be the old rusty steel fasteners where I have replaced then with new stainless ones, and probably a fair bit more besides!
I'm finding the exploded diagrams on DeLorean.com really useful in getting things back together where I have to confirm an assembly that's not immediately obvious.
Sent from my moto g(7) power using Tapatalk
Loving that as well, I was crazy with the camera but when you have something with a bolt and a nut its obvious but some of the washer positions seem odd to say the least.
RE: VIN#6126 Chassis restoration - igb - 08 Jun 2020
Looking good Richard, well done. Its been interesting watching progress.
Ian
VIN#6126 Chassis restoration - Rich Hanlon - 09 Jun 2020
Thank you! Nothing major today. Just a bit of cleaning and polishing under the body, plus cursing at spinning Rivnuts. No progress on those.[emoji34][attachment=857][attachment=858][attachment=859][attachment=860]
Sent from my moto g(7) power using Tapatalk
[attachment=861]
.[attachment=862]
Sent from my moto g(7) power using Tapatalk
RE: VIN#6126 Chassis restoration - Stuart Rees - 22 Jun 2020
Fantastic to watch your progress Richard, looking to do mine very soon.
What is the length of a bare frame, my local powdercoaters have a 4 meter oven.
I'm not near the car at the moment, could you measure and confirm the length for me please?
Stuart
RE: VIN#6126 Chassis restoration - er1c - 26 Jun 2020
I think it will fit in a 4m oven I measured for the trailer and It was definitely 3?? cm, I cant remember exactly but it will be fine.
Top work Rich, I have those RIVNUTS to do as well, and its one of my top jobs for satisfaction as I just hate the fact getting the access panels off is such a pain every time.
RE: VIN#6126 Chassis restoration - Chris P - 26 Jun 2020
With the Rivnuts....could you try and re-fix the existing ones in position by a drop of epoxy....or my favourite "black crap" as I call it .....the stuff that takes 24 hours to go off...like mastic but sticks anything to anything...you'd probably want a dummy screw in there, whist its going off and keep checking it didn't stick in the threads.
RE: VIN#6126 Chassis restoration - er1c - 26 Jun 2020
(26 Jun 2020, 09:29)Chris P Wrote: With the Rivnuts....could you try and re-fix the existing ones in position by a drop of epoxy....or my favourite "black crap" as I call it .....the stuff that takes 24 hours to go off...like mastic but sticks anything to anything...you'd probably want a dummy screw in there, whist its going off and keep checking it didn't stick in the threads.
What a good idea, I hadn't considered that, even some fibreglass resin or matting over each one as it shouldn't be touching the threads if its bonding the outside to the underneath...… A new rivnut probably wouldn't last long either. I may well give that a go as well.
RE: VIN#6126 Chassis restoration - Rissy - 27 Jun 2020
I've repaired some rivnut holes on my tub using araldite in the past with success. Its stronger than fibreglass resin on its own, and saves you trying to use more fibreglass matting, so makes for a neater job.
RE: VIN#6126 Chassis restoration - Chris P - 27 Jun 2020
There you go..I invented the technique and Rissy went back in time and tried it out...you could only get such info on a DeLorean forum.